Stepper motors with Motion controllerOur stepper motors with integrated electronics use stepless control technology for 65,536 microsteps per revolution and offer encoder options such as magnetic incremental, single-turn absolute, or multi-turn absolute, to meet a wide range of applications. Communication options include CANopen, Modbus RTU, EtherCAT, Modbus TCP/IP, Profinet, PowerLink and Ethernet-IP, so the motors can be easily connected to any industrial network. Several of our models are IP65 rated, so they can be used in a wide range of environments where moisture or water spray is present.![]() More about Stepper motors with Motion controller |
![]() |
.
![](/images/empty.png)
More Filters
![](/images/empty.png)
![](/images/empty.png)
Products
Product finder
Technology: |
Category: |
ISS042
Stepper with Motion controller
Size (mm) | 42 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT, Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 0,22 - 0,8 |
Current/Phase (A) | 2 |
Operating Voltage (Vdc) | 12 - 36 |
ISI042 -IP65
Stepper with Motion controller
Size (mm) | 42 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT, Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 0,22 - 0,8 |
Current/Phase (A) | 2 |
Operating Voltage (Vdc) | 12 - 30 |
ISS057
Stepper with Motion controller
Size (mm) | 57 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
Holding Torque (Nm) | 0,55 - 1,89 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISS057 with D-Code connector
Stepper with Motion controller
Size (mm) | 57 |
Interface | Modbus-TCP, EtherCAT. Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 0,55 - 1,89 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISI057 -IP65
Stepper with Motion controller
Size (mm) | 57 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
Holding Torque (Nm) | 0,55 - 1,89 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISI057 -IP65 with D-Code connector
Stepper with Motion controller
Size (mm) | 57 |
Interface | Modbus-TCP, EtherCAT. Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 0,55 - 1,89 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISS060
Stepper with Motion controller
Size (mm) | 60 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
Holding Torque (Nm) | 1 - 3,1 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISS060 with D-Code connector
Stepper with Motion controller
Size (mm) | 60 |
Interface | Modbus-TCP, EtherCAT, Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 1 - 3,1 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISI060 -IP65
Stepper with Motion controller
Size (mm) | 60 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
Holding Torque (Nm) | 1 - 3,1 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISI060 -IP65 with D-Code connector
Stepper with Motion controller
Size (mm) | 60 |
Interface | Modbus-TCP, EtherCAT, Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 1 - 3,1 |
Current/Phase (A) | 3 |
Operating Voltage (Vdc) | 12 - 48 |
ISS086
Stepper with Motion controller
Size (mm) | 86 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
Holding Torque (Nm) | 2,2 - 12 |
Current/Phase (A) | 3 - 6,2 |
Operating Voltage (Vdc) | 12 - 48 |
ISS086 with D-Code connector
Stepper with Motion controller
Size (mm) | 86 |
Interface | Modbus-TCP, EtherCAT, Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 2,2 - 12 |
Current/Phase (A) | 3 - 6,2 |
Operating Voltage (Vdc) | 12 - 48 |
ISI086 -IP65
Stepper with Motion controller
Size (mm) | 86 |
Interface | Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
Holding Torque (Nm) | 2,2 - 12 |
Current/Phase (A) | 3 - 6,2 |
Operating Voltage (Vdc) | 12 - 48 |
ISI086 -IP65 with D-Code connector
Stepper with Motion controller
Size (mm) | 86 |
Interface | Modbus-TCP, EtherCAT, Profinet, PowerLink, EtherNet/IP |
Holding Torque (Nm) | 2,2 - 12 |
Current/Phase (A) | 3 - 6,2 |
Operating Voltage (Vdc) | 12 - 48 |
![](/images/empty.png)